The Q-Eye PSC insertion sensor uses advanced Pulse-Doppler technology. The velocity profile of the entire cross-section is captured in up to 18 measurement cells. The insertion sensor is used when the pipe is only accessible from the outside. This sensor is for use in full pipes or in partially filled pipes in combination with an integrated pressure transducer. The installation is carried out by means of a 1.5 » ball valve into existing pipework.
The insertion sensor is mounted flush with the inner pipe wall, allowing pipes to be cleaned without removal of the sensor. Additionally, the flow profile is not altered by the sensor itself. Should the sensor ever need to be removed, it can be done under process conditions thanks to the integrated ball valve.
Velocity sensor for partially and fully filled pipes incl. ball valve
Optional with integrated pressure transducer for level measurement
- Frequency: 1 MHz
‒ Velocity: ± 5.0 m/s
‒ Level (pressure transducer): 0…0.2 bar or 0…10 bar
- Uncertainty velocity:
± 0.03 m/s from -1.5 m/s to +1.5 m/s
± 2 % of reading from -5.0 to -1.5 m/s and +1.5 to +5.0 m/s
- Uncertainty pressure transducer:
‒ Linearity: 0.5 % FS (0.2 bar) or 0.25 % FS (10 bar)
‒ Error band 0 to 50 °C: max. 1.5 % FS (0.2 bar) or 0.5 % FS (10 bar)
- Cable length: 10 m incl. (max. 80 m)
- Material: Stainless steel 1.4301 (AISI 304)
- Dimensions Diameter: 38 mm (1.5 »)